ƯÀÌ»çÇ× |
FEATURES 250W stereo amp 6 mono mic channels with 3-band EQ, phantom power, effects sends, and monitor sends 4 stereo channels with EQ and sends Preamp outs Dual 24-bit effects processors Master graphic EQs One stereo tape/CD/MD channel
SPECIFICATIONS
Mic inputs- Type: balanced XLR EIN (20Hz-20kHz)- 0 OHM source resistance: -122db/125dB A-weighted 50 OHM source resistance: -122db/125dB A-weighted 150 OHM source resistance: -121db/124dB A-weighted Frequency response- -1dB: <10Hz-100kHz -3dB: <10Hz - >200kHz Gain: +33dB; +8dB with pad Max input level: +12dBu @ 8dB gain Impedance: approx. 2.2k OHM balanced/ 1.1k OHM unbalanced Signal-to-noise: 110dB; 114dB A-weighted (-11dBu in @ +33dB gain) Distortion: 0.001%; 0.0008% A-weighted Mono line inputs- Type: balanced 1/4" TRS Impedance: approx. 80k OHM balanced/ 40k OHM unbalanced Max input level: +30dBu Stereo line inputs- Type: unbalanced 1/4" TRS Impedance: approx. 40k OHM unbalanced Max input level: +28dBu EQ- Low: 60Hz, +/- 15dB Mid: 700Hz, +/- 15dB High: 6kHz, +/- 15dB preamp outputs- Type: unbalanced 1/4" TRS Impedance: approx. 1.5k OHM Max output level: +21dBu Power amp inputs- Type: unbalanced 1/4" TRS Impedance: approx. 47k OHM Max imput level: +21dBu DSP- Converters: 24-bit TI and Sigma Delta, 64/128X oversampling Sampling rate: 46.875kHz Noise- Main mix@-inf, channel fader @-inf: -76dB/-80dB A-weighted Main mix@0dB, channel fader @-inf: -72dB/-76dB A-weighted Main mix@0dB, channel fader @0dB: -71dB/-75dB A-weighted Power amp Output- Stereo mode: 250 watts into 4 OHM; 180 watts into 8 OHM Bridged mono mode: 500 watts into 8 OHM Loudspeaker- Connector: Neutrik Speakon Load impedance- Left/monitor: 4/8/16 OHM Right/mono main: 4/8/16 OHM Bridged: 8/16 OHM Power supply: 120V/60Hz Power consumption: max 1kW Fuse: T 10 A Plug: standard IEC Dimensions: 18-1/8"W x 11"H x 10-5/8"D Weight: 33 lbs.
|