| Directional Characteristic |
Cardioid |
| Principle of Operation |
Pressure gradient |
| Cartridge Type |
Pre-polarized condenser |
| Frequency Range |
20 Hz to 20 kHz
+/- 2 dB, Near field 0.8-1.2" (2-3 cm): 100 Hz to 20 kHz (4 to 6 dB soft boost at 15 kHz |
| Sensitivity |
Nominal, +/-3 dB at 1 kHz: 6 mV/Pa, -44 dB re. 1 V/Pa |
| Equivalent Noise Level |
A-Weighted: Typ. 26 dB(A) re. 20 µPa (max. 28 dB(A))
ITU-R BS.468-4: Typ. 38 dB (max. 40 dB) |
| Signal to Noise Ratio |
(A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 68 dB(A) |
| Total Harmonic Distortion (THD) |
<1% THD up to 123 dB SPL peak
<1% THD up to 120 dB SPL RMS sine |
| Dynamic Range |
Typ. 97 dB |
| Maximum Sound Pressure Level (SPL) |
Peak Before Clipping: 144 dB |
| Output Impedance |
From MicroDot: 30 to 40 Ω From DAD6001-BC: 100 Ω |
| Cable Drive Capability |
Up to 984' (300 m) with DAD6001-BC XLR adapter |
| Output Balance Principle |
Signal balanced with DAD6001-BC XLR adapter |
| Common Mode Rejection Ratio |
> 60 dB from 50 Hz to 15 kHz with DAD6001-BC XLR adapter |
| Power Supply |
For Wireless Systems: Min. 5 V through DPA adapter |
| Current Consumption |
Typ. 1.5 mA (microphone), 3.5 mA with DAD6001-BC XLR adapter |
| Connector |
1/8" (3.5 mm) locking mini-jack for Sennheiser wireless G2/G3 transmitters |
| Temperature Range |
-40 to 113°F (-40 to 45°C) |
| Cable |
Length: 4.1' (1.25 m)
Diameter: 0.06" (1.6 mm) |
| Boom Length |
3.9" (100 mm) (M) |
| Dimensions (Ø x L) |
Mic: 0.20 x 0.39" (5 x 10 mm) |
| Weight |
Single-Ear Microphone Boom: 0.035 oz (1 g)
Earhook: 0.035 oz (1 g)
Cable: 0.28 oz (8 g)
Total: 0.35 oz (10 g) |
